Filter
Top Products
Troubleshooting
6-7
Now restoring stored data
in HDD.
(Please wait. Now
maintaining stored data.)
— Performing hard disk maintenance.
Wait until the process is completed.
—
The waste toner box
almost full. Call service.
(The waste toner container
is almost full. Call service.)
— Contact your Service Representative
or Authorized Service Center.
—
The waste toner box is full.
Call service.
(The waste toner container
is full. Call service.)
Check the waste punch
box.
(Check Punch Hole box.)
Is the container for hole punch waste
paper in the optional document
finisher full?
Refer to the document finisher
Operation Guide and dispose of the
punch waste paper in the box.
—
Out of staples. Add
staples.
(Stapler empty. Add
staples.)
Is the optional document finisher out
of staples?
Refer to the document finisher
Operation Guide and replace the
staple cartridge.
—
Time for maintenance. — Periodic maintenance is required to
keep your copier in good condition.
Contact your Service Representative
or Authorized Service Center
promptly.
—
Paper misfeed. Remove
paper.
— If a paper jam occurs, the location of
the jam will be indicated on the touch
panel and the copier will stop. Leave
the copier on (| position) and follow
the instruction to remove the jammed
paper.
page 6-9
Open drawer #, check and
remove paper from inside
of the machine.
(Open cassette #, check
and remove paper from
inside of machine.)
Is there a paper jam in the cassette? Remove any jammed paper from the
cassette.
page 6-9
Remove paper from inner
tray of Finisher.
Is there any paper left in the optional
document finisher?
Remove all paper left in the document
finisher.
—
Staple jam. Remove
staples.
(Staple jam. Remove
staple(s).)
Is a staple jammed in the optional
document finisher?
Refer to the document finisher
Operation Guide and remove the
jammed staple.
—
Call service. Is this message displayed even after
opening and closing the front cover?
Make a note of this message (C
followed by a number), turn off the
copier ({ position), unplug the power
cord, and contact your Service
Representative or Authorized Service
Center.
—
Error Messages Checkpoints Corrective Actions Reference
Page