Filter
Top Products
4 EDITING FUNCTIONS
124 Sheet Insertion
7
Press the [BASIC] tab to display the BASIC menu. Then select the drawer in which
ordinary copy paper is placed (not the one for sheet insertion).
You must place the copy paper of the same size and direction as that for the insertion sheets in advance.
8
Select other copy modes as required, and then press the [START] button on the control
panel.
When the originals are placed on the RADF, scanning and copying start.
When they are placed on the original glass, follow steps 9 and 10.
9
Place the next original, and then press the [START] button.
Scanning of the next original starts. The scanning also starts when you press [YES] on the touch panel and then
the [START] button on the control panel. Repeat this procedure until the scanning of all the originals is finished.
10
When the scanning of all the originals is finished, press [FINISHED] on the touch panel.
Copying starts.