Kyocera FS-1100 All in One Printer User Manual


 
5 IMAGE ADJUSTMENT
158 Using Image Adjustment Functions
4
Adjust the red color or the red-and-black area.
Red in original
Press or of yellow or magenta to adjust the red color balance.
Range Adjustment
Press or to adjust the red-and-black area. When you set the red area to be larger, the area to be
copied in red becomes larger. When you set the black area to be larger, the area to be copied in black becomes
larger.
After completing the adjustment, press [OK]. This is the end of the setting.
If you want to adjust color balance of yellow and magenta on every density area, press [DETAIL] and go to the next
step.
5
Press or on each density area to obtain the desired color balance.
For example, when you adjust the high density area of magenta (M) to the side, the magenta in its high density
area will become darker.
After completing the adjustment, press [OK].
Canceling color balance adjustment
y Move the indicator of the color whose adjustment you want to cancel to the middle, and then press [OK].
y If you want to cancel the adjustment of all colors, press [RESET], and then [OK].