Kyocera FS-1100 All in One Printer User Manual


 
3.BASIC COPY MODES
Enlargement and Reduction Copying 65
3 BASIC COPY MODES
Specifying both the original size and the copy paper size separately
1
Place paper in the drawer(s).
2
Place the original(s).
3
Press [ZOOM] on the touch panel.
4
Select the desired sizes for the original and copy paper.
y If you want to select a size other than the following for the original size and copy paper size, you need to
register the size as “OTHER”. Once you register this size, it will be specified every time you press [OTHER]
on the touch panel.
North America: LD, LG, LT, ST
Other than North America: A3, A4, B4, B5
For how to register it, see the following page:
P.66 “Registering paper sizes to “OTHER” size”
y Paper sizes can also be registered by your pressing the desired drawer button of the equipment status
indication area on the BASIC menu.
5
Select other copy modes as required, and then press the [START] button on the control
panel.