Kyocera FS-1100 All in One Printer User Manual


 
6 TEMPLATES
Changing Data 177
Changing Data
You can change the data of templates or private groups that are already registered, such as the template name, user
name, password and setting of the automatic start function.
The data of the public template group can be changed from the COMMAND CENTER menu but this cannot be done
from the control panel. For how to change them from the COMMAND CENTER menu, refer to the COMMAND
CENTER Guide.
Changing private group data
1
In the template menu, select the desired group.
1) Press the [REGISTRATION] tab.
2) Press the button for the desired group.
3) Press [EDIT].
To switch the menu
y Press or .
y Key in the group number (3 digits).
2
Key in the password for the selected group. (If no password is set, go to step 3.)
1) Key in the password.
2) Press [OK].
3
Change the data following step 3 in P.170 “Creating a new private group”.
4
Press the [FUNCTION CLEAR] button on the control panel.
The menu returns to the BASIC menu.