Filter
Top Products
Final Checkout
A - 10 Unpacking & Installation
Final Checkout
Preparing Your Fax Unit
Before using your facsimile unit, please set up the following items:
Note: With a PBX system, you generally have to dial a prefix number (e.g. “9”) to
access an outside line. If you set the line type to “PBX”, you can set the prefix number
in advance. Then the unit can dial the prefix number for you whenever you dial. The
following table shows you how to dial when using the PBX mode. The prefix can be
up to four (4) digits in length.
1. Current Date and Time Your Fax unit can print out a report with the transmission
date and time for identifications.
Refer to Program User Data: Set Date/Time.
2. User Fax Number You Fax unit can print out a transmission report at a
remote unit with your fax number for identification.
Refer to Program User Data: Set User FAX Number.
3. User Name You Fax unit can print out a transmission report at a
remote unit with your company name for identification.
Refer to Program User Data: Set User Name.
4. Correct Dialling Type
(Tone or Pulse)
Select either TONE or PULSE according to the type of
telephone system connected to the facsimile unit.
Refer to Machine Option: TONE/PULSE.
5. Fax Line Type (PSTN/
PBX)
If you Fax unit is connected to the public switch telephone
network (PSTN), you can select “PSTN”, otherwise,
select “PBX.”
Refer to Machine Options: PSTN/PBX.
Phone LIne Telephone Number LCD Display/Dialing Access Line
PBX mode, prefix=9 123 @123 PBX
PBX mode, prefix=9 #123 9-123 PBX -> PSTN