Filter
Top Products
Polling RX
Advanced Facsimile 3 - 7
Polling RX
Polling RX allows you to obtain stored documents in another fax by calling the remote fax
and instructing it to transmit. To receive (poll) the document, you need to enter the correct
polling PW number.
Your unit sends the Polling PW code to the remote unit. The remote unit allows your unit
to poll if your PW code matches the remote unit document PW.
Note: Contact the Key Operator of the remote unit for the correct Polling PW
number.
Procedure
1
Press the FUNCTION Key and press 6 to select the
Polling RX menu.
2
The following message appears briefly to confirm
your selection.
3
Enter the One-Touch key of the remote fax unit or
enter the phone of the remote unit manually and
press YES.
4
The name associated with the One-Touch appears
to confirm this is the location you intended to poll.
Press YES to accept or NO to enter a new location.
5
Enter the Polling PW for the remote location.
If you do not have this PW, you will have to contact
the Key Operator for the remote fax unit for this
information.
6
You are given the opportunity to enter additional
locations to poll. To finish, press START.
7
You are given the opportunity to check the
destinations you have selected. To initiate the
Polling session, press START.
Continuous Polling RX
Your unit can be programmed to continuously poll up to ten groups. Each group can
contain up to ten location. This allows a central unit to poll remote units on a continuous
basis. Any time a document is placed in the remote unit for Polling TX, you machine will
automatically receive it. Refer to the Program section for programming details.
FUNCTION
SEL. 1-7 OR FUNCTION
6 POLLING RX?
OK=YES
NO.001=_
OK=YES (SUB= )
NO.001=DALLAS
OK=YES (DEL=NO)
POLLING PW=_
OK=YES (DEL=NO)
NO.002=_
(Fin.=START)
CHECK DESTINATIONS?
OK=YES (Fin.=START)