Filter
Top Products
Initial User Data
Facsimile Programming 4 - 5
Initial User Data
Entering The Date & Time
When you set the date and time, they appear on the LCD when the unit is in standby mode.
They also print at the top of each page you transmit to another location. The date and time
must be set in order to use the Delay Transmit, Broadcast, and Polling functions of your
unit. Follow these instructions for entering the current date and time.
1
Use the Memu Navigation procedure on page 4-1
to access the DATE & TIME? menu selection.
2
Press YES. Enter the Time and Date using the 10-
Keypad.
3
After entering this information, check to make sure it is correct. If correct, press YES to
enter it in memory. If it is incorrect, press NO and re-enter the information.
Entering Your Telephone Number
To have your phone number display on the faxes you transmit:
1
Use the Memu Navigation procedure on page 4-1
to access the USER FAX NO.? menu selection.
2
Press YES. Enter your number.
3
After entering your number, check to make sure it is correct. If correct, press YES to enter it
in memory. If the number is incorrect, press NO and re-enter the correct number
1 DATE & TIME?
OK=YES
12:39 ‘90 01 15
SET TIME (OK=YES)
2 USER FAX NO.?
OK=YES
_
OK=YES (DEL=NO)