Filter
Top Products
Frequently-used Commands
M - 9
M.2 Port Commands
In the following commands, nn can be a single port number, a list of port numbers separated by
commas, a range of port numbers separated by dashes, or the word all.
Table M-2: Port Commands
Command Option(s) Description
DEFINE PORT nn
ACCESS option
DYNAMIC
The port can initiate and receive connection requests.
LOCAL
The port can initiate connection requests, and local logins
are permitted.
NONE
The port is unusable.
REMOTE
The port can receive host-initiated connection requests.
DEFINE PORT nn BITRONICS
{EN|DIS}
When Enabled, ensures bidirectional functioning of the
parallel port. The attached printer must also support
Bitronics mode.
DEFINE PORT nn CHARACTER size
Toggles the port between 7-bit and 8-bit characters (the
default). Enter either 7 or 8.
DEFINE PORT nn DSRLOGOUT
{EN|DIS}
When Enabled, the port will be logged out automatically
whenever DSR is deasserted.