Lantronix EPS4-100 Network Card User Manual


 
LAT Configuration
6 - 3
4. Print to the queue.
6.1.1 LAT Host Troubleshooting
By default, the LAT error message codes on the host are not translated into text error messages. If
a LAT job fails and appears in the queue with an eight-digit hex result code, the code can be
translated by issuing the following commands:
$ PRINT/QUEUE=queue_name filename.txt
$ SHOW QUEUE/FULL/ALL queue_name
(note the error code nnnnnnnn)
$ SET MESSAGE SYS$MESSAGE:NETWRKMSG.EXE
$ EXIT %Xnnnnnnnn