Filter
Top Products
Frequently-used Commands
M - 12
M.3 Protocol Commands
In the following table, PROTO is an abbreviation for the optional keyword PROTOCOL.
Table M-3: Protocol Commands
Command Option(s) Description
DEFINE
IPSECURITY
ipaddress option
Note: An ipaddress
with a 0 in any segment
implies Incoming and Out-
going Disabled. An
ipaddress with a 255
in any segment applies to
all addresses in that range.
Note: Rules are applied in
the order in which they are
entered.
PORTS nn
Restricts connections to the specified IP address from
the specified ports, and connections from the IP address
to the specified ports. If no port (
nn) is specified, the
command applies to all physical and virtual ports. See
the Port Commands section for information about port
lists.
INCOMING
{EN|DIS}
Allows or restricts connections and serial port logins
from the specified address (on the network) into the
Server.
OUTGOING
{EN|DIS}
Allows or restricts Telnet sessions to the specified
address (on the network) from the Server.
BOTH {EN|DIS}
Allows or restricts connections to and from the speci-
fied address.
PRINTING
{EN|DIS}
Allows or restricts TCP/IP-based printing for the speci-
fied address.