Filter
Top Products
Getting Started
3 - 1
3 - Getting Started
It is important to consider the following points before logging into and configuring the EPS:
The EPS IP address must be configured before any TCP/IP functionality is available.
(See Setting the IP Address on page 4-2.)
There are two important passwords on the EPS: the privileged password and the login
password.
Changing any server, service, or port setting requires privi-
leged user status. The default privileged password is system.
The login password is required for remote console logins.
The default login password is access.
NOTE: If you would like to change either the privileged or login password,
either use EZWebCon or refer to the Print Server Reference Manual
located on the CD-ROM.