Lantronix EPS4-100 Network Card User Manual


 
NetWare Configuration
5 - 1
5 - NetWare Configuration
The EZWebCon configuration software is the easiest way to configure the EPS. The following
sections cover print configuration methods for NetWare hosts.
NOTE: The Server needs an IP address before you can use EZWebCon. See
the Setting the IP Address section on page 4-2 for instructions.
This chapter explains creating NDS print queues with NetWare Administrator and with the
PCONSOLE Quick Setup option. To create NDS print queues, you must be running NetWare
version 4.x with NDS capabilities.
If you are running NetWare versions 2.x, 3.x, or version 4.x with bindery emulation, you may
configure bindery print queues using QINST (bindery only) or PCONSOLE. For more
information, see the NetWare chapter of the Print Server Reference Manual, located on CD-ROM.