Lantronix EPS4-100 Network Card User Manual


 
Pinouts
J - 1
J - Pinouts
J.1 Parallel Information
Lantronix uses standard Centronics parallel connectors.
For optimum performance of your Server, Lantronix recommends the use of high quality parallel
cables. Choose one of the following:
A Lantronix parallel port cable, part number #500-011 (6 feet).
Any other brand of IEEE Std 1284-1994 compliant cable. Compliant
cables can easily be identified by the permanent label IEEE Std 1284-1994
compliant on the cable itself.
NOTE: Non-compliant cables have the same type of connectors but different
electrical characteristics.
J.2 Serial Information
Lantronix servers are RS-423 compliant, and are thus limited by the equipment at the remote end
of the serial line. If the Server is connected to an RS-232 device, it is subject to RS-232 limits:
15m (50 ft.) in length at 9600 baud, and to 2m (6 ft.) at 115.2K baud, although they will generally
work at longer lengths.