Filter
Top Products
TCP/IP Configuration
4 - 5
administrator to Telnet into the EPS. Once logged in, the administrator can enter the Change
IPaddress command to make the address permanent.
Any host wishing to access the EPS will have to be told the EPS’s IP address. This is typically
configured in the unix file /etc/hosts or via a nameserver. Refer to the host’s documentation for
additional information.
% telnet 192.0.1.228
Trying 192.0.1.228
Lantronix Version n.n/n (yymmdd)
Type Help at the ‘Local_>’ prompt for assistance.
Enter Username> gopher
Local> SET PRIVILEGED
Password> system (not echoed)
Local>> DEFINE IPADDRESS 192.0.1.228