Lantronix 900-558 Network Card User Manual


 
5: Commands and Levels
XPort Pro Command Reference 109
<line> = number of the line (lpd serial port) to be confi-
gured.
no local ip
Removes the Local IP address.
no password
Removes the PPP authentication password.
no peer ip
Removes the peer IP address.
no username
Removes the PPP authentication username.
password <text>
Sets the password for PPP authentication.
peer ip <ip address>
Sets the IP Address assigned to the peer when requested
during negotiation.
<ip address> IP address of the peer device.
ppp <line>
Enters the serial line PPP level.
show
Displays the current configuration.
show history Displays the last 20 commands entered during the current
CLI session.
terminal <line>
Enters the configure-terminal level.
<line> = number of the terminal line (serial port) to be con-
figured.
terminal network
Enters the configure-terminal level for the network.
tunnel <line>
Enters the tunnel level.
<line> = number of the tunnel line (serial port) to be confi-
gured.
username <text>
Sets the user name for PPP authentication.
write
Stores the current configuration in permanent memory.
query port (config-query_port) level commands
clear counters
Zeros Query Port counters
clrscrn
Clears the screen.
exit
Returns to the config level.
no clear counters
Unzeros Query Port counters
show
Displays statistics and information about the query port.
show history
Displays the last 20 commands entered during the current
CLI session.
state disable
Disables response to 77FE requests.
state enable
Permits response to 77FE requests.
write
Stores the current configuration in permanent memory.
root level commands
clrscrn
Clears the screen.
enable
Enters the enable level.
exit
Exit from the system
ping <host>
Ping destination continuously with 5 second timeout
ping <host> <count>
Ping destination n times with 5 second timeout
ping <host> <count> <timeout>
Ping destination n times with x timeout (in seconds)
show
Show system information
show history Displays the last 20 commands entered during the current
CLI session.
show xport_pro
Show system information
trace route <host>
Trace route to destination
rss (config-rss) level commands
clear rss
Clear the RSS Feed data