Filter
Top Products
5: Commands and Levels
XPort Pro Command Reference 117
clear counters
Sets the TFTP counters to zero.
clrscrn
Clears the screen.
exit
Returns to the config level.
no clear counters
Restores the TFTP counters to the aggregate values.
show
Displays the current configuration.
show history
Displays the last 20 commands entered during the current
CLI session.
show statistics
Displays the TFTP statistics.
state disable
Disables the TFTP server.
state enable
Enables the TFTP server.
write
Stores the current configuration in permanent memory.
traps (config-snmp-traps) level commands
clrscrn
Clears the screen.
exit
Exits to the next higher level.
no primary destination
Deletes the primary SNMP trap host.
no secondary destination
Deletes the secondary SNMP trap host.
primary destination <text>
Sets the primary SNMP trap host.
<text> = IP address of host running the SNMP trap.
secondary destination <text>
Sets the secondary SNMP trap host.
<text> = IP address of host running the SNMP trap.
show
Shows the current configuration.
show history
Displays the last 20 commands entered during the current
CLI session.
state disable
Disables the sending of SNMP trap messages.
state enable
Enables the sending of SNMP trap messages.
write
Stores the current configuration in permanent memory.
tunnel 1 (tunnel:1) level commands
accept
Enters the accept level for this tunnel.
auto show statistics
show connection statistics
clear counters
Zeros all tunnel counters
clrscrn
Clears the screen.
connect
Enters the connect level for this tunnel.
disconnect
Enters the disconnect level for this tunnel.
exit
Exits to the enable level.
line <line>
Enters the line level.
<line> = number of the line (serial port) to be configured.
lpd <line>
Enters the configure lpd level.
<line> = number of the line (lpd serial port) to be confi-
gured.
modem
Enters the modem level for this tunnel.
no clear counters
Unzeros all tunnel counters
packing
Enters the packing level for this tunnel.
ppp <line>
Enters the serial line PPP level.
serial
Enters the serial level for this tunnel.
show history Displays the last 20 commands entered during the current
CLI session.
show statistics
show connection statistics
terminal <line>
Enters the configure-terminal level.