Filter
Top Products
5: Commands and Levels
XPort Pro Command Reference 57
show history
Displays the last 20 commands entered during the current
CLI session.
write
Stores the current configuration in permanent memory.
cpm (cpm) level commands
add <cp> to <group>
Adds the specified CP to the specified group.
<cp> = configurable pin.
<group> = the name
of the group to which you want to add
the CP.
add <cp> to <group> <bit>
Adds a specified CP to a specified group at a specified bit
position.
<cp> = configurable pin.
<group> = the name of the group to which you want to add
the CP.
<bit> = bit position.
clrscrn
Clears the screen.
create <group>
Creates a configurable pin (CP) group.
<group> = the name for the new group.
delete <cp> from <group>
Removes a CP from a specified group and sets the CP to
its default
configuration of input.
<cp> = configurable pin.
<group> = the name of the group.
delete <group>
Removes a group and resets all CPs in that group to the
default
configuration of input.
<group> = the name of the group.
disable
<group>
Disables the specified group.
<group> = the name of the group.
enable <group>
Enables a disabled group.
<group> = the name of the group.
exit
Exits to the enable level.
get <group>
Displays the value of the specified group.
<group> = the name of the group.
set <cp> as input
Configures a CP as an asserted high input.
<cp> = configurable pin.
set <cp> as input assert low
Configures a CP as an asserted low input.
<cp> = configurable pin.
set <cp> as output
Configures a CP as an asserted high output.
<cp> = configurable pin.
set <cp> as output assert low
Configures a CP as an asserted low output.
<cp> = configurable pin.
set <group> <value>
Assigns a value to the specified group.
<group> = the name of the group.
<value> = numeric value to assign to the CP group. Can
be specified as hex
if prepended with “0x”.
show <group>
Displays group information for specified group.
<group> = the name of the group.
show cp
Displays configuration and group information for all CPs.
show groups
Displays all groups defined and their state.
show history
Displays the last 20 commands entered during the current
CLI session.
write
Stores the current configuration in permanent memory.
device (device) level commands