Lantronix 900-558 Network Card User Manual


 
5: Commands and Levels
XPort Pro Command Reference 84
selected on the login connect menu.
<text> = IP address.
remote port <number>
Sets the remote port used to connect to the host.
<number> = port to be used.
show
Displays the current configuration.
show history Displays the last 20 commands entered during the current
CLI session.
ssh username <text>
Sets the username for logging into the host via SSH.
<text> = username.
write
Stores the current configuration in permanent memory.
host 3 (tunnel-connect-host:1:3) level commands
address <text>
Sets the remote host to establish tunneling connections
with.
<text> = IP address or host name of the remote host.
aes decrypt key <hexadecimal>
Sets the connect tunnel AES decrypt key with up to 16
bytes.
Each byte is represented by two adjacent hex digits.
Bytes may run together or be separated by optional punc-
tuation:
123ABC "12 3A BC" 12,3A,BC 12.3a.bc 12:3a:bc
Note that quotes must enclose the value if it contains
spaces.
aes decrypt key text <text>
Sets the connect tunnel AES decrypt key with up to 16
bytes.
Each byte is represented by a single character.
Note that quotes must enclose the value if it contains
spaces.
aes encrypt key
<hexadecimal>
Sets the connect tunnel AES encrypt key with up to 16
bytes.
Each byte is represented by two adjacent hex digits.
Bytes may run together or be separated by optional punc-
tuation:
123ABC "12 3A BC" 12,3A,BC 12.3a.bc 12:3a:bc
Note that quotes must enclose the value if it contains
spaces.
aes encrypt key text <text>
Sets the connect tunnel AES encrypt key with up to 16
bytes.
Each byte is represented by a single character.
Note that quotes must enclose the value if it contains
spaces.
auto show statistics
show connection statistics
clrscrn
Clears the screen.
default protocol
Restores the default protocol as "TCP".
default tcp keep alive
Restores the default 45 second connect mode TCP keep
alive timeout.
exit
Exits to the next higher level.
no address
Removes the remote host address used to establish
tunneling connections.
no aes decrypt key
Removes the connect tunnel AES decrypt key.
no aes encrypt key
Removes the connect tunnel AES encrypt key.
no port Removes the remote port used to establish tunnel connec-
tions.
no ssh username
Removes the SSH user name.
no tcp keep alive
Disables the connect mode TCP keep alive timeout.