Filter
Top Products
5: Commands and Levels
XPort Pro Command Reference 99
%B bytes sent excluding headers (0 = '-')
%h remote host (same as %a)
%{h}i header contents from request (h = header string)
%m request method
%p ephemeral local port value used for request
%q query string (prepend with '?' or empty '-')
%t timestamp HH:MM:SS (same as Apache
'%(%H:%M:%S)t')
%u remote user (could be bogus for 401 status)
%U URL path info
%r first line of request (same as '%m %U%q <version>')
%s return status
logging state disable
Disables HTTP server logging.
logging state enable
Enables HTTP server logging.
max bytes <number>
Sets the maximum number of bytes the HTTP server ac-
cepts when receiving
a request.
max log entries <number>
Sets the maximum number of HTTP server log entries.
<number> = maximum number of HTTP server log entries.
max timeout <seconds>
Sets the maximum time the HTTP server waits when re-
ceiving a request.
<seconds> = maximum timeout value.
no clear counters
Restores the HTTP counters to the aggregate values.
no port
Disables the HTTP Server port.
no secure port
Disables the HTTP Server SSL port.
port <number>
Sets the port number the HTTP server will use.
<number> = port number.
secure port
<number>
Sets the port number the HTTP server will use over SSL.
<number> = port number.
secure protocols ssl3 disable
Disables the protocol.
secure protocols ssl3 enable
Enables the protocol.
secure protocols tls1.0 disable
Disables the protocol.
secure protocols tls1.0 enable
Enables the protocol.
secure protocols tls1.1 disable
Disables the protocol.
secure protocols tls1.1 enable
Enables the protocol.
show
Displays the current configuration.
show auth
Displays the HTTP server authentication settings.
show history
Displays the last 20 commands entered during the current
CLI session.
show log
Displays the HTTP server log.
show statistics
Displays the HTTP statistics.
state disable
Disables the HTTP server.
state enable
Enables the HTTP server.
write
Stores the current configuration in permanent memory.
icmp (config-icmp) level commands
auto show statistics
Continuously shows ICMP statistics
clear counters
Zeros counters
clrscrn
Clears the screen.
exit
Exits to the configuration level.
no clear counters
Unzeros IP counters
show
Displays the current configuration.