Filter
Top Products
4: Configuration Using XML
XPort Pro Command Reference 24
ip filter delete entries enable, disable If enabled, deletes
any existing
entries before
adding “filter
entry”.
filter delete ip address Deletes a specific
IP filter entry.
net mask Deletes a specific
IP filter entry.
filter entry ip address If configured, is a
specific IP
address.
net mask If configured, is a
specific net mask.
line
(Attribute of
“instance” is a
number.)
name
interface rs232, rs485 half-
duplex, rs485 full-
duplex
Default:
termination enable, disable Default: disable
state enable, disable Default: depends
on instance
protocol none, modbus rtu,
modbus ascii, tunnel,
ppp, lpd, lpd or
tunnel
Default:
baud rate Default: 9600 bits
per second
parity even, none, odd Default: none
data bits 7, 8 Default: 8
stop bits 1, 2 Default: 1
flow control none, hardware,
software
Default: none
xon char Accepts a control
character, for
example,
<control>
A represents
control-A Default:
<control>Q
Group Name Group Item Value Name Value Options Additional
Information