Lantronix 900-558 Network Card User Manual


 
5: Commands and Levels
XPort Pro Command Reference 118
<line> = number of the terminal line (serial port) to be con-
figured.
terminal network
Enters the configure-terminal level for the network.
tunnel <line>
Enters the tunnel level.
<line> = number of the tunnel line (serial port) to be confi-
gured.
write
Stores the current configuration in permanent memory.
udp (config-udp) level commands
auto show statistics
Continuously shows UDP statistics
clear counters
Zeros counters
clrscrn
Clears the screen.
exit
Exits to the configuration level.
no clear counters
Unzeros IP counters
show history Displays the last 20 commands entered during the current
CLI session.
show statistics
Shows UDP statistics
write
Stores the current configuration in permanent memory.
vip (config-vip) level commands
auto show counters
Displays VIP counters continuously.
auto show status
Displays VIP status continuously.
clear counters
Sets the VIP counters to zero.
clrscrn
Clears the screen.
exit
Exits to the configuration level.
monitor timeout
<seconds>
Monitors the VIP conduit, resets the device if conduit not
established.
no clear counters
Restores the VIP counters to the aggregate values.
no monitor timeout
Disables the VIP monitor.
show
Displays the current configuration.
show counters
Displays the VIP counters.
show history Displays the last 20 commands entered during the current
CLI session.
show status
Displays the VIP status.
state disable
Disables use of Virtual IP (VIP) addresses.
state enable
Enables use of Virtual IP (VIP) addresses.
write
Stores the current configuration in permanent memory.
xml (xml) level commands
auto show statistics
Show XML statistics
clear counters
Zeros XML statistics
clrscrn
Clears the screen.
exit
Exits to the enable level.
no clear counters
Unzeros XML statistics
secret xcr dump
Dump XML configuration containing secrets to the console
secret xcr dump <group list>
Dump specified XML configuration containing secrets to
the console
secret xcr export <file>
Save XML configuration containing secrets to a file
secret xcr export <file> <group list>
Save specified XML configuration containing secrets to a
local file
show history
Displays the last 20 commands entered during the current