Filter
Top Products
3: Command Line Interface
PremierWave EN Command Reference 12
An overview of the levels in the PremierWave EN is presented in Figure 3-2 CLI Level Hierarchy
below.
Figure 3-2 CLI Level Hierarchy
Commands at the login level (see Figure 3-3 Login Level Commands below) do not affect current
configuration settings and are not displayed initially. If you type ?, you will see the login sub-
commands. These commands provide diagnostic and status information only.
Figure 3-3 Login Level Commands
>?
clrscrn exit
ping <host> ping <host> <count>
ping <host> <count> <timeout> show
show history show lines
trace route <host> trace route <host> <method>
enable
(login) enable
ssl
ethernet
link
If 1
query port
syslog
cpm
line <line>
filesystem
configure
device
ssh
telnet
rss
dns
wlan link
edit
<bumber>
email <number>
ssh
bridge
<bridge>
arp
diagnostics
ftp
host
<number>
http
ip
smtp
wlan
profiles
vip
terminal
<line>
terminal
network
tunnel <line>
xml
client
server
credentials
trusted
authorities
accept
connect
disconnect
modem
packing
serial
icmp
cp
If 2
cli
cp output
password
cp output
host
<number>