Filter
Top Products
5: Commands and Levels
exit
Exits to the enable level.
lookup <host_or_ip>
Return a lookup on the DNS name or IP address.
show
Show DNS status.
show history
Displays the last 20 commands entered during the current CLI
session.
write
Stores the current configuration in permanent memory.
edit 1 (config-profile-basic:default_adhoc_profile) level commands
advanced
Switch to advanced level
apply wlan
Try out WLAN settings without saving them to Flash.
If the settings do not work, when you reboot the device,
it will still have the original settings.
channel <number>
Sets the radio channel for AdHoc.
<number> = number of the radio channel.
clrscrn
Clears the screen.
default channel
Restores the default value to the radio channel.
default topology
Restores the default topology, which is Infrastructure.
exit
Exit to the profiles level
network name <text>
Sets the network name.
no network name
Clears the network name.
scan 2.4 ghz band disable
Disables scanning of the 2.4 GHz band for this profile.
scan 2.4 ghz band enable
Enables scanning of the 2.4 GHz band for this profile.
scan 5 ghz band disable
Disables scanning of the 5 GHz band for this profile.
scan 5 ghz band enable
Enables scanning of the 5 GHz band for this profile.
scan dfs channels disable
Disables scanning of the DFS channels (5 GHz band) for this pro-
file.
scan dfs channels enable
Enables scanning of the DFS channels (5 GHz band) for this pro-
file.
security
Switch to security level
show
Displays the current configuration.
show history
Displays the last 20 commands entered during the current CLI
session.
state disable
Disables this profile.
state enable
Enables this profile.
topology adhoc
Sets topology to Adhoc.
topology infrastructure
Sets topology to Infrastructure.
write
Stores the current configuration in permanent memory.
edit 2 (config-profile-basic:test1) level commands
advanced
Switch to advanced level
apply wlan
Try out WLAN settings without saving them to Flash.
If the settings do not work, when you reboot the device,
it will still have the original settings.
channel <number>
Sets the radio channel for AdHoc.
<number> = number of the radio channel.
clrscrn
Clears the screen.
default channel
Restores the default value to the radio channel.
default topology
Restores the default topology, which is Infrastructure.
exit
Exit to the profiles level
PremierWave EN Command Reference 76