Filter
Top Products
4: Configuration
xPrintServer User Guide 31
Netmask
Default Gateway
DNS Server
6. Click Save.
7. Click OK in the confirmation popup that appears. The unit will automatically restart.
8. Close out of your xPrintServer browser and open a new browser.
9. Enter the newly assigned static IP address.
10. Login to the xPrintServer user interface (see Logging In). The assigned static IP address will
appear on the System Status page.
Admin Printer Configuration Options
Configuration options available on a specific printer can be accessed and configured through the
xPrintServer user interface (i.e., configuring the number of copies, duplexing and page range).
You may utilize the Search feature as necessary to find a particular, previously discovered printer
and use these directions to configure it.
Printing a Test Page
Use these directions to print a test page for a selected printer.
1. Login to the xPrintServer user interface (see Logging In).
2. Click the Printer tab to access the Printers > List page.
3. Utilize Navigation as necessary in situations where there are multiple pages of printers.
4. Utilize Search as necessary to find a particular printer.
5. Click the button beside the printer through which you want to print a test page.
6. Click Print Test Page in the popup command menu that appears (or Cancel within the same
menu if you want to back out of it) and a test page print job will be sent to the selected
printer..
7. Click OK in the confirmation popup providing a print job ID.
Purging Job History
Use this selection to purge all printed job history information. By default, xPrintServer otherwise
maintains a list of the last 50 printed jobs.
1. Login to the xPrintServer user interface (see Logging In).
2. Click the Printer tab to access the Printers > List page.
3. Utilize Navigation as necessary in situations where there are multiple pages of printers.
4. Utilize Search as necessary to find a particular printer.
5. Click the button beside the printer with the job history you want to purge.