Filter
Top Products
4: Configuration
xPrintServer User Guide 35
Setting Printer Options
Use this selection to view and modify settings in an xPrintServer-provisioned printer.
1. Login to the xPrintServer user interface (see Logging In).
2. Click the Printer tab to access the Printers > List page.
3. Utilize Search as necessary to find a particular printer.
4. Click the button beside the printer you wish to set printer options.
5. Click Set Printer Options in the popup command menu that appears (or Cancel within the
same menu if you want to back out of it). Available printer settings will appear.
Different printers will have different printer settings available for modification.
Some printers will have multiple heading tabs by which all the setting options are
organized.
Figure 4-7 Sample Printer Options
6. Click through available tabbed headings (all in dark blue) and make changes as desired.
7. Click Save Changes to save. A note verifying that settings have been saved successfully
will appear on the screen. Changes to printer settings will remain in place until changed
through xPrintServer.
The printer above provides only
five modifiable settings under the
single heading tab, “General”.
The printer to the right
has several modifiable settings
organized beneath each of the
seven dark blue heading tabs.
Clicking any of the blue heading
tabs brings you to the printer
setting options organized under
that tab.
Every printer has different setting
options available, organized under
one or more heading tab(s) as
exemplified by the options
available in these printers.