Filter
Top Products
110RX1200
Operation
Connect to LGO via
USB cable
step-by-step
Step Description
1. Start the PC.
2. Plug the GEV161 cable into RX1250.
3. Turn the RX1250 on.
4. Plug the GEV161 cable into the USB port of the PC.
)
ActiveSync starts up automatically.
If does not start automatically, start ActiveSync.
If not already installed, run the ActiveSync installation program.
5. Allow USB connections inside the Connection Settings window of
ActiveSync.
6. Start LGO or install it if not available.
7. Start the Leica SmartRover software on the RX1250.
8. Goto Data Exchange Manager in LGO.
9. Click Refresh on the ActiveSync folder.
10. Establish the communication to RX1250.
)
The folders CF-Card, System1200 and Sensor System are displayed in
the Data Exchange Manager.