Filter
Top Products
60RX1200
Operation
Mount base radio
to tripod
step-by-step
Step Description
1. Attach TCPS27B to the adapter and then attach to the tripod leg.
2. Adjust the angle of TCPS27B until it is approximately vertical.
3. Adjust the location of the adapter on the tripod leg so that there are no
metallic objects in the horizontal plane around the antenna.
)
Metallic objects near the antenna disturb transmissions from the
radio.
)
To achieve the best performance from
TCPS27B, it should be mounted in a vertical
position on the tripod leg approximately
30 cm from the top of the tripod.
)
If the adapter is no longer able to retain it’s angle position, the adjustment
bolt at the hinge can be slightly tightened.
~ 30 cm
RX12_010