Operation RX1200 115
4.11.2 Working in Transparent Mode
Description <ComMode: Transparent> enables the remote control of TPS1200 with GeoCOM
commands. RX1220 becomes a transparent radio modem, like the RadioHandle or
TCPS27B. GeoCOM commands can be sent from a computer to RX1220, which are
then sent to TPS1200 via RadioHandle or TCPS27B. These commands will be
executed on TPS1200 and results can be sent back.
Access
step-by-step
Step Description
)
From CONFIGURE Interfaces on TPS1200 ensure that GeoCOM Mode
is turned on and RCS Mode is turned off.
)
Proceed to the local menu of RX1200.
1. Select RX1200:
Main Configuration Menu: Radio/Comms Settings, Modes page.
2. Set <ComMode: Transparent>.