Leica RX1200 Calculator User Manual


 
84RX1200
Operation
Detach a clip-on-
housing step-by-
step
1. Turn GHT56 over to gain access to the space for the clip-on-housing.
2. Place the clip-on-housing into position such that
the guide rails on the GHT56 are aligned with the guide rails on the
clip-on-housing.
AND
the LEMO port on the GHT56 is aligned with the connector on the clip-
on-housing.
3. Slide the clip-on-housing into position such that the connector is
completely plugged into the LEMO port. It clicks.
)
Do not turn the screw on the topside of the clip-on-housing. The clip-on-
housing is automatically fixed when completely plugged into position.
Step Description
Step Description
1. Press the small press clip next to the guide rail on the GHT56 to unlock
the clip-on-housing from the GHT56.
2. Slide the clip-on-housing away from the press clip until the connector is
completely unplugged from the LEMO port.