Operation RX1200 51
Step Description
1. Remove holder from the travel container.
2. For GLS11 pole: the plastic sleeve is to be fitted to the pole clamp.
For GPS pole: the plastic sleeve is not required.
3. Insert pole into the clamp hole.
4. Adjust the angle of the mounting plate and the height of the holder on the
pole to comfort.
5. Tighten the clamp with the tightening screw.
)
Once tightened, the button on the tightening screw can be depressed to
change the position of the handle for more comfort.
)
A locking mechanism is incorporated in the mounting plate of the holder.