Filter
Top Products
Dual In-Line Memory Module (DIMM)194
5 Remove the panel.
6 Insert the DIMM at an angle
(about 45°) into the connector,
making sure that the notch on
the unit aligns with the tab on
connector, and then press down
carefully until it clicks into place.
" Be sure to handle the
DIMM by the edges only.
" You will hear a click when
the DIMM is properly
placed.
7 Reinstall the panel and tighten
the two screws.
8 Attach the right side cover.
9 Reconnect all interface cables.
10 Reconnect the power cord, and
turn on the printer.