Filter
Top Products
6. Insert the TPM into the TPM connector on the system board.
Figure 66. Installing the TPM
7. If you have lifted up the riser card assembly 1, reinstall it into the chassis. See “Replacing the riser
card assembly 1” on page 135
.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation, go to “Completing the parts replacement” on page 152. Then, you can
congure the TPM function in the Setup Utility program. See “Conguring the TPM function” on page 58.
Removing the TPM
Attention: Do not open your server or attempt any repair before reading and understanding “Safety information”
on page iii and “Guidelines” on page 69.
This topic provides instructions on how to remove the TPM if the server has one installed.
Chapter 6. Installing, removing, or replacing hardware 105