Filter
Top Products
8. Connect the server to an ac power source and then start the server from the bootable USB key that
contains the amiboot.rom le. The recovery process starts. After the recovery process is completed,
your server will automatically turn off.
9. Repeat step 2 through step 5.
10. Move the BIOS recovery switch back to the off position.
11. Reinstall any parts and reconnect any cables. Then, reinstall the server cover. See “Completing the
parts replacement” on page 152.
12. Connect the server to an ac power source and turn on the server. The BIOS settings recover to the
factory default settings. You need to check and congure the BIOS settings for your specic needs. See
“Using the Setup Utility program” on page 53
.
Note: If you cannot recover the BIOS after using the instructions in this topic, the BIOS ROM might be
damaged and you need to replace the system board. Contact the Lenovo Customer Support Center.
Using the ThinkServer EasyStartup program
This topic guides you to use the ThinkServer EasyStartup program to set up and congure your server.
The ThinkServer EasyStartup program simplies the process of conguring RAID and installing supported
Windows and Linux operating systems and device drivers on your server. The program works in conjunction
with your Windows or Linux operating system installation disc to automate the process of installing the
operating system and associated device drivers. This program is provided with your server on a self-starting
(bootable) ThinkServer EasyStartup DVD. The user guide for the program also is on the DVD and can be
accessed directly from the program interface.
If you do not have a ThinkServer EasyStartup DVD, you also can download an ISO image from the Lenovo
Support Web site and make a disc by yourself.
To download the ThinkServer EasyStartup program image and burn it into a disc, do the following:
1. Go to http://www.lenovo.com/drivers and follow the instructions on the Web page to locate the
ThinkServer EasyStartup program.
2. Download the ISO image for the ThinkServer EasyStartup program and the readme le. The readme le
contains important information about the ThinkServer EasyStartup program.
3. Print the readme le and read it carefully.
4. Use an optical drive and any DVD burning software to create a bootable disc with the ISO image.
Features of the ThinkServer EasyStartup program
This topic lists the features of the ThinkServer EasyStartup program.
The ThinkServer EasyStartup program has the following features:
• Contained in a self-starting (bootable) DVD
• Easy-to-use, language-selectable interface
• Integrated help system and user guide
• Automatic hardware detection
• Contains the RAID conguration utility
• Provides device drivers based on the server model and detected devices
• Downloads device drivers from the ThinkServer EasyStartup DVD according to the operating system
or add-on device
Chapter 5. Conguring the server 61