Lenovo 2595 Server User Manual


 
For hard disk drives with different capacities, install the hard disk drives following the order of the hard
disk drive bays as well as the order from the lowest capacity to the highest capacity.
Before you begin, print all the related instructions or ensure that you can view the PDF version on another
computer for reference.
Notes:
Depending on the model, your server might look slightly different from the illustrations in this topic.
Use any documentation that comes with the hot-swap hard disk drive and follow those instructions in
addition to the instructions in this topic.
To install or replace a hot-swap hard disk drive, do the following:
1. Do one of the following:
If you are installing a new hot-swap hard disk drive, refer to the hard disk drive installation rules in
this topic and locate the appropriate hard disk drive bay. Then, press the circled area
2 to open
the handle of the dummy hard disk drive tray.
If you are replacing a hot-swap hard disk drive, locate the hard disk drive you want to replace and
press the release button 1 to open the handle of the hard disk drive.
Figure 91. Opening the handle of a 3.5-inch hot-swap hard disk drive or dummy tray
Chapter 6. Installing, removing, or replacing hardware 127