Filter
Top Products
USB connectors: Connect a USB device to either of these connectors.
CD-eject button: Press this button to release a CD from the CD drive.
CD drive activity LED: When this LED is lit, it indicates that the CD drive is in use.
Rear view
The following illustration shows the LEDs on the rear of the server.
1 Ethernet 1 activity LED 3 Ethernet 2 activity LED
2 Ethernet 1 link LED 4 Ethernet 2 link LED
Ethernet activity LED: This LED is on each Ethernet connector. When this LED is
lit, it indicates that there is activity between the server and the network.
Ethernet link LED: This LED is on each Ethernet connector. When this LED is lit, it
indicates that the Ethernet controller is connected to the network.
The following illustration shows the connectors on the rear of the server.
1 Power-cord connector 5 Ethernet 1 connector
2 Systems-management connector 6 Ethernet 2 connector
3 USB 3 connector 7 Video connector
4 USB 4 connector 8 Serial connector
Power-cord connector: Connect the power cord to this connector.
Serial connector: Connect a 9-pin serial device to this connector.
Video connector: Connect a monitor to this connector.
Ethernet connector: Use either of these connectors to connect the server to a
network. Ethernet connector 1 supports Serial over LAN (SOL).
USB connector: Connect a USB device to either of these connectors.
26 ThinkServer RS110 Types 6435, 6436, 6437, and 6438: Installation Guide