Filter
Top Products
6. If prompted, insert the original Windows OS CD. If the autorun launches when
you insert the CD, close it. The Windows Components Wizard will automatically
detect and install the necessary files.
7. Click Finish.
Uninstalling the LANDesk Software Agent
If the Core Server has LANDesk agents on it from a previous Management Suite
release, it will fail the autorun prerequisite check. You must remove the old agents
by running uninstallwinclient.exe from the \Program Files\LANDesk\
ManagementSuite
folder.
Using the Configuration/Setup Utility program
The Configuration/Setup Utility program is part of the BIOS. You can use it to
perform the following tasks:
v View configuration information
v View and change assignments for devices and I/O ports
v Set the date and time
v Set and change passwords
v Set and change the startup characteristics of the server and the order of startup
devices (startup-drive sequence)
v Set and change settings for advanced hardware features
v View and clear the event and error logs
v Change interrupt request (IRQ) settings
v Resolve configuration conflicts
To
start the Configuration/Setup Utility program, complete the following steps:
1. Turn on the server.
2. When the message Press F1 for Configuration/Setup is displayed, press F1.
If an administrator password has been set, you must type the administrator
password to access the full Configuration/Setup Utility menu.
3. Follow the instructions on the screen.
See
the User's Guide that is on the ThinkServer Documentation DVD for more
information about using the Configuration/Setup Utility program.
Using the LSI Logic Configuration Utility program
Use the LSI Logic Configuration Utility program to configure hot-swap hard disk
drives that are connected to the SAS/SATA controller.
Important:
v If the server is a simple-swap SATA model that contains a SATA RAID back
plate, you can use the LSI Logic Configuration Utility program to configure the
simple-swap SATA hard disk drives.
v If you install an optional RAID controller in the server, such as the
ServeRAID-MR10i controller, use the configuration software that comes with the
adapter to configure the hard disk drives.
To
start the LSI Logic Configuration Utility program, complete the following steps:
1. Turn on the server.
Chapter 4. Configuring the server 35