Filter
Top Products
Table 7. Fn key combinations (continued)
Key combination Description
Apply a presentation scheme directly, with no need to start Presentation Director.
To disable this function and use the Fn+F7 key combination for switching a display output
location, start Presentation Director, and change the settings.
Note: If the computer is a Windows 7 model, it does not support presentation schemes, but
the Fn+F7 combination is available for switching a display output location.
Fn+F7
For Windows 7:
Switch between the computer display and an external monitor. Windows will show these
display options:
• Computer display only (LCD)
• Computer display and external monitor (same image)
• Computer display and external monitor (extended desktop)
• External monitor only
Note: To switch between the computer display and an external monitor, the Win+P key
combination is also available.
For Windows Vista and Windows XP:
Switch between the computer display and an external monitor. If an external monitor is
attached, computer output is displayed in the following three patterns by turns:
• External monitor (CRT display)
• Computer display and external monitor (LCD + CRT display
• Computer display (LCD)
Notes:
1. This function is not supported if different desktop images are displayed on the computer
display and the external monitor (the Extend desktop function).
2. This function does not work while a DVD movie or a video clip is playing.
To enable this function, start Presentation Director, and change the Fn+F7 settings.
Note: Multiple users can log on to a single operating system by using different user IDs. Each
user needs to change the settings.
Fn+F8
Change the settings of the UltraNav
®
pointing device.
Fn+F9 Reserved.
Fn+F10 Reserved.
Fn+F11 Reserved.
Fn+F12 Put the computer into hibernation mode. To return to normal operation, press the power
button for less than four seconds.
Note: To use Fn+F12 for hibernation, you must have the ThinkPad PM device driver installed
on the computer.
Fn+PgUp
Turn the ThinkLight
®
on or off.
Note: This function is supported only on the ThinkPad Notebooks that have the ThinkLight.
The on or off status of the ThinkLight is shown on the screen for a few seconds when you
press Fn+PgUp.
Fn+Home The computer display becomes brighter.
Fn+End The computer display becomes dimmer.
Fn+Spacebar Enable the FullScreen Magnier function.
Fn+PrtSc Have the same function as the SysRq key.
50 Hardware Maintenance Manual