1120 Media card reader
For access, remove these FRUs in order:
• “1010 Bottom cover” on page 58
• “1020 Battery pack” on page 60
• “1030 Hard disk drive or solid-state drive assembly” on page 61
• “1040 Keyboard” on page 63
• “1070 PCI Express Mini Card for wireless WAN or mSATA solid-state drive” on page 68
• “1090 Keyboard bezel” on page 72
Removal steps of media card reader
Remove the screws 1 .
1
1
Step Screw (quantity) Color
Torque
1
M2 × 3.0 mm, at-head (2) Silver
0.181 Nm
(1.85 kgf-cm)
Lift the media card up to remove the connector 2
4
3
2
When installing: Ensure that the connector is attached rmly to the keyboard bezel.
76 Hardware Maintenance Manual