Filter
Top Products
4
When installing:
• Before you attach the thermal fan assembly to the computer, apply thermal grease, at an amount of 0.2
grams, on the parts marked a as in the following illustrations. Either too much or too less application of
grease might cause a thermal problem due to imperfect contact with a component. For models that have
a discrete graphics module, you need to peel the thin lm off from the rubbers marked
b .
• Ensure that the thermal fan assembly connector is attached rmly to the system board. Fasten the screws
2 rst and then fasten the screws 3 in descending alphabetical order as illustrated above.
For models that have a discrete graphics module:
a
b
For models that have an integrate graphics module:
a
Chapter 9. Removing or replacing a FRU 81