Filter
Top Products
29
Drop untagged frame. Press “
Space
” key to select drop or forward the
untagged frame.
3. Select
<Save>
to save the configuration.
VLAN Configure interface
Create VLAN Group
Create Port-Based VLAN
1. Select
<Edit>.
2.
VLAN Name:
Type a name for the new VLAN, ex: VLAN01.
3.
Group ID:
Type the VLAN group ID. The group ID rang is from 1 to 4094.
4.
Member:
Press ”
Space
” key to change the member value. There are two types to
selected:
a.
Member:
the port is a member port.
b.
NO:
it means that port is NOT a member port.
5. Press
“ESC”
key to go back action menu line.
6. Select
<Save>
to save the configuration.
NOTE:
If you had configured the trunk groups, you can see it (ex: TRK1, TRK2…)
in the port list. You also can configure the trunk group as the VLAN member.