Filter
Top Products
84
Basic
1. Click
A
dd
button.
2.
Enable GVRP Protocol:
check the check box to enable GVRP protocol.
3.
Group Name:
assign a name for the new VLAN.
4.
VLAN ID:
fill in a VLAN ID (between 2-4094). The default is 1.
5.
Protocol VLAN:
choose the protocol type. Default is NONE.
6. From the Available ports box, select ports to add to the switch and click
A
dd
button. If the trunk groups exist, you can see it in here (ex: TRK1, TRK2…),
and you can configure it is the member of the VLAN or not.
802.1q VLAN –Add interface
7. Click
Next
. Then you will see the page as follow.