Filter
Top Products
83
4. You will see the VLAN displays.
5. If the groups’ list is over one page, you can click
Next Page
to view other VLAN
groups.
6. Use
Delete
button to delete unwanted VLAN.
7. Use
Edit
button to modify existing VLAN group.
802.1Q VLAN
Tagged-based VLAN is an IEEE 802.1Q specification standard. Therefore, it is
possible to create a VLAN across devices from different switch venders. IEEE 802.1Q
VLAN uses a technique to insert a “tag” into the Ethernet frames. Tag contains a VLAN
Identifier (VID) that indicates the VLAN numbers.
You can create Tag-based VLAN, and enable or disable GVRP protocol. There are
256 VLAN groups to provide configure. Enable 802.1Q VLAN, the all ports on the
switch belong to default VLAN, VID is 1. The default VLAN can’t be deleting.
GVRP allows automatic VLAN configuration between the switch and nodes. If the
switch is connected to a device with GVRP enabled, you can send a GVRP request
using the VID of a VLAN defined on the switch; the switch will automatically add that
device to the existing VLAN.
802.1q VLAN interface