Filter
Top Products
72
Console Port Information
Console is a standard UART interface to communicate with Serial Port. User can use
windows HyperTerminal program to link the switch. Please refer to
Console
Management
Æ
Console login
for detail steps.
Console port information shows as follow:
Bits per seconds: 9600
Data bits: 8
Parity: none
Stop Bits: 1
Flow control: none
Console Port Information interface
Port Controls
You can change the port status.
1. Select the port by scroll the list in
Port
column.
2.
State:
User can disable or enable this port control.
3.
Negotiation:
User can set auto negotiation mode is Auto, Nway (specify the
speed/duplex on this port and enable auto-negotiation), Force of the port.
4.
Speed:
set the speed of each port.
5.
Duplex:
set full-duplex or half-duplex mode of the port.
6.
Flows control:
set flow control function is
ON
or
OFF
in Full Duplex mode.
7.
Back Pressure:
set Back Pressure is
ON
or
OFF
in Half Duplex mode.
8.
Band Width:
The port1 ~ port 24, supports port ingress and egress rate control.
For example, assume port 1 is 10Mbps, users can set it’s effective egress rate is
1Mbps, ingress rate is 500Kbps. The switch will perform flow control or Back
Pressure to confine the ingress rate to meet the specified rate.
In:
fill in the port effective ingress rate. The valid range is 0 ~ 1000. The unit is