Filter
Top Products
30
Create VLAN Group: PortBase interface
Create 802.1Q VLAN
1.
Enable security VLAN setting:
select to enable or disable security VLAN group.
When you select to enable security VLAN group, only the members in this VLAN
group can access to the switch. The steps of setting security VLAN refer to the
following step 2~ 8. After you have configured the security VLAN group, you can
continue to create other VLAN groups. When you don’t select to configure security
VLAN group, then just create VLAN group refer to following step 2 ~ 8.
Note:
There is only one security VLAN group.
2.
Select
<Edit>
.
3.
VLAN Name:
Type a name for the new VLAN, ex: VLAN01.
4.
VLAN ID:
Type a VID (between 1~4094). The default is 1. There are 256 VLAN
groups to provided configure.
5.
Protocol VLAN:
Press “
Space
”
key to choose protocols type.
6.
Member:
Press “
Space
” key to change the member value.
Untagged:
this port is the member port of this VLAN group and outgoing
frames are NO VLAN-Tagged frames.
Tagged:
this port is the member port of this VLAN group and outgoing frames
are VLAN-Tagged frames.
NO:
it means that the port is NOT member of this VLAN group.
7.
Press “
ESC
” key to go back action menu line.
8. Select
<Save>
to save the configuration.
Formatted: Bullets and Numbering
Formatted: Bullets and Numbering