Filter
Top Products
69
Priority Queue Service settings:
select the priority queue service type.
First Come First Service:
the sequence of packets sent is depend on arrive
order.
All High before Low:
the high priority packets sent before low priority
packets.
Weighted Round Ratio:
select the preference given to packets in the
switch's high-priority queue. These options represent the number of high
priority packets sent before one low priority packet is sent. For example, 5
High: 2 Low means that the switch sends 5 high priority packets before
sending 2 low priority packet.
Qos Policy: High Priority Levels:
0~7 priority level can map to high or low
queue.
Miscellaneous Setting
Collisions Retry Forever:
disable is in half duplex. If happen collision will retry 48
times and then drop frame. Enable is in half duplex. If happen collision will retry
forever.
Hash Algorithm:
CRC Hash or Direct Map for MAC address learning algorithm
IFG Compensation:
Internal Packet Gap time compensation configure. Select to
“Enable” or “Disable”.
802.1x Protocol:
enable or disable 802.1x protocol.
IGMP Query Mode:
recognizes different queries from clients or servers to decide
which Query will be the first priority. The modes are:
a.
Auto Mode:
chooses the switch that has the smallest IP address to be set for
the IGMP Query mode.
b.
Enable Mode:
enables the switch to be the IGMP Querier.
c.
Disable Mode:
disables all other switches from being the IGMP Querier.