Filter
Top Products
48
LACP Configuration interface
Working Ports Setting
1. Select
<Edit>
2.
Group:
Display the trunk group ID.
3.
LACP:
Press “
Space
” key to enable or disable LACP (Link Aggregation Control
Protocol) support. When LACP enable, the group is LACP static trunk group.
When LACP disable, the group is local static trunk group.
4.
Working Port Num:
The max number of ports can be aggregated at the same
time. If LACP static trunk group, the exceed ports is standby and able to
aggregate if work ports fail. If it is local static trunk group, the number must be the
same as group ports.
5. Select
<Save>
NOTE:
Before set LACP support, you have to set trunk group on the Trunk
Configuration.