Filter
Top Products
Printing a demonstration page
The following steps explain how to load a single sheet of paper so you can print a demonstration page.
1 Set the forms thickness lever to position 1.
2 Turn the printer on.
The Power light comes on solid, the Paper Out light is blinking, and the current default font light is on solid.
3 Open the manual feeder, and then move the paper select lever to the position.
4 Move the left paper guide to the right until it stops.
5 Insert a single sheet of paper into the front of the printer.
6 Adjust the right paper guide to fit the paper width.
A
Learning about the printer
13