Filter
Top Products
45
Selecting print media
Fiber content
Most high-quality xerographic paper is made from 100% chemically pulped wood. This content provides the paper with a
high degree of stability resulting in fewer paper feeding problems and better print quality. Paper containing fibers such as
cotton possesses characteristics that can result in degraded paper handling.
Recycled paper
Lexmark supports US executive order 13101 which strongly encourages the use of recycled papers in government
agencies. Ask for warranty information and performance claims from your paper supplier, and/or test small quantities
before buying large amounts. A list of suppliers and approved papers used by the US Government Printing Office can be
found at http://www.gpo.gov/qualitycontrol/cpypaper.htm.
Unacceptable paper
The following papers are not recommended for use with the printer:
• Chemically treated papers used to make copies without carbon paper, also known as carbonless papers,
carbonless copy paper (CCP), or no carbon required (NCR) paper
• Preprinted papers with chemicals that may contaminate the printer
• Preprinted papers that can be affected by the temperature in the printer fuser
• Preprinted papers that require a registration (the precise print location on the page) greater than ±0.09 in., such as
optical character recognition (OCR) forms
In some cases, you can adjust registration with your program to successfully print on these forms.
• Coated papers (erasable bond), synthetic papers, thermal papers
• Rough-edged, rough or heavily textured surface papers or curled papers
• Recycled paper having a weight less than 60 g/m
2
(16 lb)
• Multiple-part forms or documents
Preprinted forms and letterhead
• Use 60 to 90 g/m
2
(16–24 lb) weight, grain long papers for best results.
• Use only forms and letterhead printed using an offset lithographic or engraved printing process.
• Choose papers that absorb ink but do not bleed.
• Avoid papers with rough or heavily textured surfaces.
Use papers printed with heat-resistant inks designed for use in xerographic copiers. The ink must withstand temperatures
of 210°C (410°F) without melting or releasing hazardous emissions. Use inks that are not affected by the resin in toner. Inks
that are oxidation-set or oil-based should meet these requirements; latex inks might not. If you are in doubt, contact your
paper supplier.
Preprinted papers such as letterhead must be able to withstand temperatures up to 210°C (410°F) without melting or
releasing hazardous emissions.