Filter
Top Products
Problem Solving 2-1
4036-304
2. Problem Solving
This chapter describes two methods to solve the operational problems. The first relies on
the scanner internal diagnostics to report error codes. The second uses troubleshooting
techniques to isolate the problem. In many cases, the internal error codes will help you to
locate the source of the problem quickly. If no error codes are reported, or if the error
codes do not locate the source of the problem, refer to the troubleshooting section.
Error Codes
MFD Controller Errors
MFD Controller Errors are errors detected by the MFD controller card within the MFD
cage pertaining to electronic cards. All MFD controller cage errors are posted to the user
interface touch screen along with audible beep codes and LED codes. During the Power-
On Self Test procedure, errors detected cause a number of audible beeps to be produced
three times. The corresponding LED pattern continuously displays on the controller card
until the system is powered down. Use the following tables to read the beep/LED codes
and follow the recommended repair action.
Note: For generation 1 MFD controller cards, there are two rows of four LEDs. The LEDs
are difficult to view as the controller cage must be removed from the scanner. The LED
pattern shown depicts which LEDs are illuminated in the two rows.